CNS-PVM
CNS-PVM
CNS stationary shears with side compression
- ZDAS new stationary scrap shears
- Excellent price/quality ratio
- Suitable for cutting large quantities of heavy, bulky or amortisation scrap
- Produced in series with cutting forces from 8 to 16 MN and outputs from 20 to 95 tons/hr.
- Scrap can be loaded during automatic cutting cycle with minimum time loss
- Low height of the hopper enables easy scrap loading via a mobile loader
Workplace with CNS-PVM hydraulic shear
| CNS-PMV | |
|---|---|
| Cutting force (t) | 800, 1000, 1 600 |
| Length of charging chamber (mm) | 6 000, 8 000, 10 000 |
| Width of charging chamber (mm) | 2 000-2 500 |
| Height of charging chamber (mm) | 1 600-2 300 |
| Maximum strength of the processed material (MPa) | 440 |
| Installed input of the main pumps (kW) | 3 × 110-8 × 110 |
| Shears output (steel scrap) (t/hr.) | 20-95 |
Advantages
- Possibility to load scrap during cutting
- PLC diagnostics
- Central lubrication
- Sensors on all rollers
- Drive located inside of container
- Hydraulic clamping of knives
- Monitors hydraulic oil levels
-
- Front view of the shear and side cover of the pusher
-
- Hydraulic cylinders operating the folding cover
-
- The pusher’s hydraulic drive
-
- Moving cover of the cutting area
-
- Schematic of the scrap compression principle
