Material Straightening Equipment
Material straightening equipment includes round bar and tube straightening machines, auxiliary equipment and hydraulic straightening presses. Straightening machines can be implemented in rolling mill finishing lines, inspection lines or individual straightening lines. In straightening lines, the straightened material is transported to straightening machines by means of conveyers, or troughs, situated at the input and output.
Contact:
Stanislav Pelikán
Commercial Manager of Engineering Division
Phone: +420 566 643 212
E-mail: stanislav.pelikan@zdas.cz
Bar straightener
Diameter of straightened bars up to 350 mm
- XRK 2 double-roll straightener
- XRK 9 nine-roll straightener
- XRK 10 ten-roll straightener
- XRK 15 fifteen-roll straightener
Tube straightener
Diameter of straightened tubes up to 400 mm
- XRK 3-3 six-roll straightener – drive of all rolls
- XRK 5-5 ten-roll straightener – drive of all rolls
Straightening line equipment
- Bars‘ division from bank of bars
- Input and output channels
- Feeding and extracting equipment
- Collecting bags
Straightening hydraulic presses
- For the straightening of shafts, steel castings, welds, rolls, hammer forged forgings and flat parts from plate under cold or hot straightening
- For the straightening of round and four-edge profiles under cold straightening and for wheelsets‘ straightening
- Nominal power follows the request of customer and respective technology
